solar water heaters photovoltace solar food dryers solar cookers ÈÇáÚÑÈí technical data photo gallery  TECHNICAL DATA MISR AMERICA SOLAR WATER HEATER  THE SUN IS AN ENORMOUS POTENTIAL SOURCE OF ENERGY It is a fact that we cannot continue to burn fossil fuels ( coal, and natural gas ) at a steadily increasing rate without incurring serious environmental consequences. We know that these sources will run out in the near future.
The scientists' dreams come true since we use solar energy as the only alternative! It is safe proved and ready for use now.
Every second , the earth receives a quantity of energy in the form of solar radiation that is 24000 times greater than the entire world's energy requirement.
The sun will continue to shine with the intensity for at least another 10 billion year.  solar intencity .
MISR AMERICA TECHNOLOGY  Our system is very simple and efficient design. A flat plate collector with an active surface of 2 sqr. m . durable, elegant and easy to install. It can be connected in series with the other existing water - heaters.
It is designed to exacting the Egyptian standards and good enough to withstand the climate of the Arab and African countries.
Crossection in the normal cupper tube collector 
Crossection in our uniqe collector design 
Efficiency comparison between our system & cupper tube system
It is necessary to mark out the following advantages:-
1. The collector’s effective area which faces the sun and water exceeds 94% of the total area that is more than 40% of any other collector available now .
2. The collector consists of stainless steel plates which deal directly
with the sun without any reflectors , mirrors , or copper tubes ( which can collect dirt's or dusts or moisture contents ) .
3. It consists of completely fixed construction elements, not mobile or motive parts or gears . . Ect which assure easy use and maintenance.  MISR AMERICA SOLAR HEATER DESIGN TYPES: ( SS 188/M+A/175) (SG 188 /M+A/175) (GL188/M+A/175 )
1- Over flow .
2- Make-up tank
3- C.W PIPE TO H.W tank
4- Hot water tank
5- Piping connection between H.W tank and 6- Collector base
7- Hot water to user.
8 Solar collector. 9- Make-up tank base. 10- Cold water feed
11- Air vent. 12- Cold water tank. THE SOLAR COLLECTOR ( 188/M+A ) 
1- Hot water out let.
2- Glass.
3- Rubber Frame.
4- Absorber plate.
5- Cold water in let.
6- Back Casing.
7- Isolating Foam.
8- Outer Casing. TECHNICAL DATA OF MISR AMERICA COLLECTOR ABSORBER MATERIAL : STAINLESS STEEL 304 0.5 MM
OR GALVANIZED STEEL 0.8 MM thickness.
DIMENSIONS : Length : 206.5 cm width : 106.5 cm thickness : 13cm NETABSORBER AREA : 2X1 = 2m² RATIO OF EFFECTIVE AREA : 1.88 m² 94 %.
HEATING RATE : 175 liters at 45c° - 55c° in winter.
60c° - 75c° in summer.
At normal condition without the use of electric heater
APPROX NET WEIGHT( EMPTY) : 56 KG. INSULATION : Styrobor; 2.5 cm Anti – humidity or other atmospheric conditions-covered with aluminum foils. OUTER CASING : Anodized aluminum : 15-18 micro anti - rust .
GLASS COVER : High – penetration glass .3 mm thickness.
ABSORBER COATING : anti- atmospheric conditions sun resistant for long time.the absorption factor 93% the radiation factor 14% .
BACK CASING : Galvanized steel ( anti – rust )0.4 – 0.5 mm .
RUBBER SEALING : Special rubber , anti – heat, resist for long time without cracks
COLLECTOR BASE : Constructed from steel structures. resist winds up to 50 Km./hour. STORAGE TANKS
TYPES : ( SS 188/M+A/175)( SS 188 /M+A/175)
1- Make-up tank Cover 2- Over flow pipe
3- Make-up tank 4- drain of - Make-up tank
5- Base of - Make-up tank 6- Outer casing of H.W tank
7-Insulation material 8-Inner vessel for H.W
9-Electric booster element. 10- Electric booster cover
11- Cold water inlet to H.W tank 12- Drain of H.W tank
13 – Base of H.W tank 14- Hot water outlet to user
15- Piping connection with collector 16- Cold water feed
17- Floating valve. 18- Air vent . TECHNICAL DATA OF MISR AMERICA HOT WATER TANK 1. A cylindrical tank, assures the pressure equilibrium on the surface
area reduces the heat leakage .
2. Safety guaranteed as it equipped with make – up tank and floating system.
It is completely anti – explosive and well equipped with cleaning facilities.
3. the outer vessel is made from a high quality corrosion resistant galvanized steel.
4. High density polyurethane foam layer is injected between the tow vessels to keep the water hot for long periods of time.
5. No use of any heat exchangers.
6. Auxiliary electric heater element 220V/AC maintains the water at optimum temperatures on complete – rarely – cloudy days.
7. Anti rust coated , absolutely harmless to health, heat resistant.
8. Easily and tightly installed. Wind force resistant. STANDARD SIZES : 175-350-550-750 litres of hot water/day . INER VESSEL MATERIAL : Galvanized steel anti-rust 1.5mm thickness or stainless steel 1-1.5.mm.thickness. INSULATION MATERIALS : Completely isolated by injected polyurethane 5-6 cm thickness OUTER CASING MATERIAL : Galvanized steel, anti-rust coated 0.8-1mm . TANK BASE : Steel structure, anti - rust coated. MAKR-UP TANK : Galvanized steel, anti-rust 1.25-1.5 mm with long water floating life valve.
INSTALLATION It is very simple installation - the water tubes are connected directly to the tank and from the tank to the collector .
- one cold water inlet
- one hot water outlet
- one electrical power supply line to the electric heater .
All the hot pipe lines shoud be completely insolated with high density insulating materials : - Glass wool .
- Polyurethane .
- Styrobore .
- Aramaflex ............ as required .
also it is available to use pumps, sensore ... etc when advised according to the design consideration . MAINTENANCE & GUARANTEE WE OFFER YOU THE QUICKEST RESPONCE TO YOUR CALL . AND 100% SATISFACTION GUARANTEE D . .  MISR AMERICA  ecomag@minanet.net 
   |
